Marquest ScientificFamily owned since 1978. Molded in Anaheim, assembled and tested in Costa Mesa, California.
Try a part number

3/8" valve shown. This part's dimensions are in the specifications below.
Part Number
NG-250-F-PVD
PVDF flare ends are fusion welded to the Solef® PVDF body, a permanent joint with no threads and no sealant in the flow path. The flared tube seals mechanically on the flare itself, so there is no PTFE tape, pipe dope or thread sealant to shed particles or leach organics.
Threaded connections need thread sealant, and sealant can add organic contamination, shed particles and degrade over time. A PureFlare connection is a flared PFA, FEP or PTFE tube clamped onto a PVDF flare end that is fusion welded to the valve body. Nothing else is in the joint.
Dimensions in inches (mm), for reference. A, B and C are measured to the end of the installed flare nut. Valve dimensions are common to the standard Throttle Master™ needle valve.
Maximum working pressure at temperature for PVDF body, PTFE seal, integral flare connection
| Temperature | Max Pressure (PSI) |
|---|---|
| 50°F(10°C) | 200 PSI |
| 68°F(20°C) | 200 PSI |
| 86°F(30°C) | 200 PSI |
| 104°F(40°C) | 180 PSI |
| 122°F(50°C) | 160 PSI |
| 140°F(60°C) | 140 PSI |
| 158°F(70°C) | 120 PSI |
| 176°F(80°C) | 100 PSI |
| 194°F(90°C) | 90 PSI |
| 212°F(100°C) | 80 PSI |
| 248°F(120°C) | 60 PSI |
The flare connection sets the limit, so these ratings apply to every PureFlare size and pattern. Rating conditions: water, non-shock service; properly flared PFA, FEP or PTFE tube; PFA flare nut tightened to the nut maker's torque specification. Maximum continuous service temperature for PVDF is 248 °F (120 °C).
List Price
$229.50
Made to Order
Lead time depends on quantity; confirmed with your order.
Need a lead time before you order? Call 714-491-9191 or email sales.
ID ring color
White · standard
Order as
NG-250-F-PVD
White adds no code. Pick another color to add its two-letter code.
Need help with this product?
(714) 491-9191