
Series LB Laboratory Base Fixtures
Marquest Scientific's line of laboratory base fixtures provides point-of-use access to many laboratory fluids, including distilled, deionized, pharma-grade, RO, and ultra-filtered water, as well as common laboratory gases and chemicals. Every component is injection molded for rugged construction.
Port Connections
3/8" Female NPT process inlet × removable serrated barb tip (accepts 1/4"–1/2" I.D. low-durometer tubing; leaves a 1/4" Female NPT outlet when removed)
Key Features & Benefits
- Deck or wall mounting, in PVC, Natural Polypropylene, or High Purity PVDF
- Duraline zero-dead-leg control valve — or a remote (no valve) base fixture
- Removable serrated barb outlet for 1/4"–1/2" I.D. soft tubing — leaves a 1/4" FNPT outlet when removed
- Standard 3/8" FNPT inlet; 3/8" compression tube transition fitting included
- Renewable valve cartridge (DL-RC180-PVD) per SEFA 7-2010-8.2a on valved fixtures
- All injection-molded, rugged construction, finished to suit any installation
- Meets or exceeds FDA, USDA, and USP standards
- Made in USA; Build America, Buy America (BABA) compliant
Available Materials:
PTFE Seals
Valved fixtures are PTFE sealed, with an encapsulated PTFE shut-off seal; remote fixtures have no valve at the fixture.
Product Filters
Filter by material or configuration
Laboratory Base Fixtures
6 products available
Find an Authorized Distributor
Buy Series LB Laboratory Base Fixtures through a distributor near you.







