Try a part number

USA Flag
BABA COMPLIANT
Made in USA
Throttle Master PureFlare angle pattern needle valve with a white ID ring

3/8" valve shown. This part's dimensions are in the specifications below.

PVDF
PureFlare™

1/2" Integral Flare Angle Pattern Needle Valve — PVDF

Part Number

NA-500-F-PVD

PVDF flare ends are fusion welded to the Solef® PVDF body, a permanent joint with no threads and no sealant in the flow path. The flared tube seals mechanically on the flare itself, so there is no PTFE tape, pipe dope or thread sealant to shed particles or leach organics.

The High-Purity Advantage

Threaded connections need thread sealant, and sealant can add organic contamination, shed particles and degrade over time. A PureFlare connection is a flared PFA, FEP or PTFE tube clamped onto a PVDF flare end that is fusion welded to the valve body. Nothing else is in the joint.

Key Features

  • Integral flare connections: PVDF flare ends are fusion welded to the body, with no thread sealants, tape, dope or adhesives at assembly
  • Precision metering: a 24-pitch metering thread gives fine, repeatable flow adjustment across the handle's travel
  • Bubble-tight, low-torque shutoff: a 100% virgin PTFE needle tip with an SPI/SPE No. 1 finish closes with light hand torque
  • No elastomers, metals or lubricants: wetted parts are Solef® PVDF and virgin PTFE only, with no wetted threads
  • Easy maintenance: flare connections break and remake without replacing fittings; repair kit TPWKL-F-PVD is available
  • Color-coded ID ring: one of nine ring colors on the handle identifies the line or fluid at a glance; white is standard

Specifications

Body, BonnetSolef® PVDF (Syensqo), virgin, injection molded
Tube Size1/2" OD
End ConnectionsIntegral flare, inlet × outlet, for PFA, FEP or PTFE tube
ConfigurationAngle Pattern
Flow Coefficient (Cv)0.78 full open
Max Pressure200 PSI @ 68°F (20°C)
Max Temperature248 °F (120 °C), 60 psi
Needle Tip, Stem Seal100% virgin PTFE. Needle finish SPI/SPE No. 1
Metering Thread24 TPI; 2 turns, closed to full open
HandleBlack PVDF, Ø 2.00" (50.8 mm)
ID RingWhite standard. Also black, blue, brown, green, orange, purple, red or yellow, by color code
Outlet centerline to inlet end (B)2.61" (66.3 mm)
Body centerline to outlet end (C)2.62" (66.5 mm)
Port Centerline to Top of Handle3.50" (88.9 mm) open, max; 3.20" (81.3 mm) closed, min
Panel Thickness0.032" to 0.50" (0.8 to 12.7 mm)
CleaningHot DI water rinse, nitrogen dried
ComplianceFDA, USDA and USP standards met or exceeded. NSF/ANSI 14 & 61 material compliance. BABA compliant

Dimensions in inches (mm), for reference. A, B and C are measured to the end of the installed flare nut. Valve dimensions are common to the standard Throttle Master™ needle valve.

Pressure/Temperature Ratings — PVDF Integral Flare

Maximum working pressure at temperature for PVDF body, PTFE seal, integral flare connection

TemperatureMax Pressure (PSI)
50°F(10°C)200 PSI
68°F(20°C)200 PSI
86°F(30°C)200 PSI
104°F(40°C)180 PSI
122°F(50°C)160 PSI
140°F(60°C)140 PSI
158°F(70°C)120 PSI
176°F(80°C)100 PSI
194°F(90°C)90 PSI
212°F(100°C)80 PSI
248°F(120°C)60 PSI

The flare connection sets the limit, so these ratings apply to every PureFlare size and pattern. Rating conditions: water, non-shock service; properly flared PFA, FEP or PTFE tube; PFA flare nut tightened to the nut maker's torque specification. Maximum continuous service temperature for PVDF is 248 °F (120 °C).

List Price

$229.50

Made to Order

Lead time depends on quantity; confirmed with your order.

Need a lead time before you order? Call 714-491-9191 or email sales.

ID ring color

White · standard

Order as

NA-500-F-PVD

White adds no code. Pick another color to add its two-letter code.

Request a Quote
Ships from Costa Mesa, CA
View all PureFlare Valves

Secure Checkout

256-bit SSL Encrypted

Powered by StripeWe accept Visa, Mastercard, American Express, and Discover

Need help with this product?

(714) 491-9191