Try a part number

USA Flag
BABA COMPLIANT
Made in USA
Product image 1
PVDF
DURALINE™ Recirculating

Deck Mount DI Water Lab Faucet, Recirculating — High Purity PVDF

Part Number

DL-DDR-3

Recirculating deck mount laboratory faucet for return-to-tank DI/UPW loops. High Purity PVDF construction.

Key Features

  • Factory-installed compact recirculating module below the deck, at the inlet of the thru-deck nipple shank
  • Zero dead-leg design — the supply loop stays in motion through the faucet, so water is fresh at the point of use
  • 3/8" FNPT module inlet from the supply loop and 3/8" FNPT module outlet back to the tank
  • 0.125" I.D. FEP recirculating tube included — seats in the module, exits the outlet, and returns water to the reservoir
  • Full recirculation to the DURALINE point-of-use control valve; removable barb tip leaves a 1/4" FNPT outlet
  • Heavy-wall, injection-molded stanchion; 120° rotation from full flow to closed with a positive stop at OFF
  • 100% virgin PTFE stem seal and encapsulated PTFE shut-off seal — no elastomers, metals, or lubricants
  • Completely renewable control valve via cartridge replacement (SEFA 7-2010-8.2a)
  • 5-year warranty against material or manufacturing defects — made in USA

This Configuration

MountDeck Mount
ConfigurationRecirculating (return-to-tank)
Body MaterialHigh Purity PVDF
Module Inlet (from supply loop)3/8" Female NPT
Module Outlet (return to tank)3/8" Female NPT
Faucet Outlet1/4" Female NPT (with removable barb)
Recirculating Tube0.125" I.D. FEP
Max Pressure150 PSI
CertificationsNSF 14/61, FDA, USDA, USP, SEFA 7

Also Available In

Specifications

Loop Type
Return-to-tank DI/UPW loop with a non-pressurized reservoir

The module outlet must return to a vented (atmospheric) tank; do not tee the return into a pressurized line.

Module Location
Below the deck, at the inlet of the thru-deck nipple shank

Allow clearance under the counter for the module and both 3/8" connections.

Tube Routing
The 0.125" I.D. FEP tube seats inside the module, exits the module outlet, and runs back to the reservoir
Mounting
Deck mount — requires a 1" diameter hole
Max Supply Pressure
150 PSI

Materials of Construction

Available Materials:

PP
PVDF

PTFE Seals

100% virgin PTFE stem seal and encapsulated PTFE shut-off seal, with an FEP recirculating tube — no metal in the wetted path.

No Elastomers in wetted path
No Metals in wetted path
No Lubricants
Engineered for return-to-tank DI/UPW loops where point-of-use water must stay in motion.